【奥地利E+E 】EE46结露开关

EE46 condensation monitor is used for detecting the danger of condensation on pipes, ducts and other surfaces before condensation actually occurs.

The device measures the relative humidity at the surface to be monitored and provides an early warning signal (relay) when the humidity reaches 90% RH.

The signal can be used for initiating control steps such as increasing the water temperature in a chilled ceiling, reducing the cooling capacity or switching on the heating.A special coating protects electronics and sensor against contamination.

Key Features

• Early detection of condensation danger
• High accuracy and long term stability
• Compact design
• Fast response time
• Sensor protection
• Easy mounting and wiring
• LED status indication

Typical Applications

• Chilled ceilings
• HVAC, buliding automation
• Rectifier cabinets for wind power generatiors
• Switching and electronics cabinets

EE46结露报警器可以用来监测制冷天花板的结露状况，防止暖通空调系统在临界点发生结露，它还可作为运行于临近露点附近其他系统的结露监控。

由于结露报警器的温度与环境温度相一致，露点的测量实际是对相对湿度的测量，结露报警器基于高品质电容型湿敏元件来测量接近露点时的相对湿度。在达到 90% RH 的切换点时，结露报警器会为后续控制程序（如增加水温、降低制冷功能，打开加热系统等）的启动提供动作条件，并发出报警输出信号。报警器上的状态指示灯能及时提醒用户有结露危险。

产品经过特殊的镀膜处理后，能有效保护电子部件及敏感元件免受环境污染的影响。

EE46 系列结露报警器可安装在水管、管道和墙面上