CC1W无线称重传感器德国FLINTEC(富林泰克)

CC1W型是革命性的新型无线抽空控制称重传感器。CC1W具有与我们已建立的CC1相同的设计属性，但无需电缆连接。

称重传感器由随时可用的D电池供电，可为设备供电12到18个月。

CC1W背后的技术使其与目前市场上所有无线产品区分开来。主要优点是极低的功耗，能够提供连续的数据流，高信号强度和较长的电池寿命。另外，CC1W提供内置的位置感应功能，该功能与负载测量同步，从而无需霍尔效应传感器或倾斜仪。

CC1W由称重传感器和基本单元两部分组成。

CC1W无线称重传感器型号有：CC1W-30klb (CC1W-13.6 t) 、 CC1W-klb(CC1W-22.7 t)

The model CC1W is revolutionary new wireless pump off control load cell. The CC1W utilizes the same design attributes as our established CC1 but eliminates the need for the cable connection.

The load cell is powered by a readily available D-cell battery that can power the unit for 12 – 18 months.

The technology behind the CC1W sets it apart from all wireless products currently available in the market. The primary advantage is an extremely low power consumption, which is able to deliver a continuous flow of data, high signal strength and a long battery life. In addition, the CC1W offers built-in position sensing capabilities, which is synchronized with the load measurement, eliminating the need for hall effect sensors or inclinometers.

The CC1W is made up of two parts, the load cell and a base unit.

主要特征

容量30磅(13.6吨)和50磅(22.7吨)

UL认证的Class 1 Div 1

每秒100个读数

位置感应能力

12至18个月的电池寿命

高信号强度和加密

IP67防护等级，适用于-70°至175°F(-55°至80°C)

疲劳寿命至少为50.000.000

应用

泵监控系统(POC /抛光杆称重传感器)。

技术参数表：

(*) 2-3dBm; Telemetry range will change according to site RF Channel Settings
(**) Battery Life changes as per RF output; latency; Temp; antenna distances etc.

外观尺寸图：

wiring (base unit)

Wiring connections for base unit as follows. Load cell powered by battery. See user manual for full details.

Caution! Base unit is not intended to meet safety certifications. Use appropriate safety procedures when installing.

德国FLINTEC(富林泰克)其他产品推荐有：SB2-45000lb-C3称重传感器、RC3-40t-C3称重传感器、PC2-150Kg-C3称重传感器、ULB-1000kg-C3称重传感器、