意大利laumas T8系列称重模块应用：用于滚筒，平台，储罐，料斗等的安装套件；配有可自动对中的脚，高度可调，可抵抗侧向力和防倾斜，以补偿支撑板的不对中。最大静负荷300公斤。
DESCRIPTION
Adjustable upper plate in AISI 304 stainless steel (PPV).
Lower plate and block in galvanized steel.
Constraint against lateral forces and anti-tilt by nickel-plated selfcentring joint foot.
Misalignment compensation of the support plates structure.
Adjustable height.
Locking screw to avoid damage during transport and installation.
可调上板采用AISI 304不锈钢(PPV)。
降低板和块在镀锌钢。
通过镀镍自定心关节脚约束侧向力和防止倾斜。
支撑板结构失配补偿。
可调节高度。
锁紧螺钉，避免运输和安装过程中损坏。
DIMENSIONS AND TECHNICAL SPECIFICATIONS
During the transport and installation the lock (*) must touch under the load cell. After installation, move the lock away from the load cell.
Interconnect the lower plates to the earthing.
In case of structure with four-point support, if one-point does not touch the support base of the foot, you must proceed to adjust foot height.
尺寸及技术规格
在运输和安装过程中，锁(*)必须接触测压元件下。安装后，将锁从测压元件移开。
将较低的板与接地连接。
如果是四点支撑的结构，如果一点没有碰到脚的支撑底座，必须继续调整脚的高度。
其他品牌产品推荐：意大利DINI ARGEO称重传感器、原装进口日本kyowa扭矩传感器、美国STS称重传感器、HBM扭矩传感器、
下面这些产品，一样很精彩哟！
产品繁多，总有一款适合你，更可来图来样定制生产，选型！
【仪器仪表网】专业供应意大利Laumas JOLLY2/4称重仪表,意大利Laumas JOLLY2/4称重仪表，【 意大利Laumas JOLLY2/4称重仪表】保证货期快捷，100%原装进口,一...
产品名称：AU单点式称重传感器 产品型号：AU-3Kg、 AU-6Kg、AU-15Kg、AU-30Kg、 AU-50Kg 产品品牌：Laumas称重传感器 意大利LAUMAS称重传感器 ...
产品名称：AS单点式称重传感器 产品型号：AS-0.25Kg、AS-0.5Kg、AS-1Kg 产品品牌：Laumas称重传感器 意大利LAUMAS称重传感器 产品类型：意大利...
产品名称：DTX双剪切梁称重传感器 产品型号：DTX-9000Kg、DTX-20klb、DTX-13600Kg、DTX-30klb、DTX-18000Kg、DTX-40klb、DTX-23000Kg、DTX-50klbKg、D...
产品名称：DTL-25000Kg双剪切梁称重传感器 产品型号：DTL-25000Kg 产品品牌：Laumas称重传感器 意大利LAUMAS称重传感器 产品类型：意大利LAUMAS...
GENERAL FEATURES VCOKDTL Galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrati...
GENERAL FEATURES VDTX Mounting kit constructed of nickel-plated steel alloy; designed for on-board weighing, overhead cranes, silos, mixi...
GENERAL FEATURES V15000称重模块：for cells CBL 15000; CBX 30000 V30000称重模块：for cells CBL 30000; CBX 50000 V100000称重模块：for ce...
GENERAL FEATURES V10000 for cells CBL 250-12500; CBX 15000 V10275 for cells CBL 250-12500; CBX 15000 AISI-304 stainless steel mounting...
GENERAL FEATURES P10000：Lower plate BASESUP：Turned upper base BASEINF：Turned lower base PIASTRA+BASEINF：Turned lower base + Low...
PSCLS2000称重模块 PSCLS传感器 Hot worked galvanized mounting kit designed for silos, mixing machines, tanks, hoppers subject to vibration...
PV80CLS称重模块 Stainless steel mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a stainless steel self-ce...
GENERAL FEATURES PVCLS Stainless steel mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a self-centring...
PS for load cells FTP 3000-5000; FTK 3000-5000; FTZ 5000 PS10T for load cells FTP 10000 Hot worked galvanized mounting kit designed for s...
PPV / PPV80称重模块 FOR SINGLE POINT, BENDING BEAM, SHEAR BEAM AND COMPRESSION LOAD CELLS。
以质量求生存，以信誉求发展，满足合同规定及潜在需求！
全国咨询热线
157-6785-5089
仪器仪表网©2015-2018仪器仪表网 版权所有
服务热线：15767855089
电话：15767855089 (微信)
售前咨询