TFC/PV称重模块 (max 300 kg)
Mounting kit provided with a foot against lateral forces and anti-tilt to compensate for misalignment of the support plates. Self-centring joint foot constructed of stainless steel. Small adjustable height.
Max static load 300 kg.
Series laod cells:FCK - FCOL
Application range from 5 to 300 kg(TFC PV称重模块适用范围从5公斤到300公斤)
型号:TFCPV、TFCPV10
TFC PV称重模块描述
可调上板采用AISI 304不锈钢(PPV)。
下板和块采用AISI 304不锈钢。
通过不锈钢自定心连接脚来约束侧向力和防止倾斜。
支撑板结构失配补偿。
可调节高度。
锁紧螺钉,避免运输和安装过程中损坏。
在运输和安装过程中,锁(*)必须接触测压元件下。安装后,将锁从测压元件移开。
将较低的板与接地连接。
对于四点支承的结构,如果一点不接触压缩接头,在固定螺栓之前必须先插入垫片。
下面这些产品,一样很精彩哟!
产品繁多,总有一款适合你,更可来图来样定制生产,选型!【仪器仪表网】专业供应意大利Laumas JOLLY2/4称重仪表,意大利Laumas JOLLY2/4称重仪表,【 意大利Laumas JOLLY2/4称重仪表】保证货期快捷,100%原装进口,一...
产品名称:AU单点式称重传感器 产品型号:AU-3Kg、 AU-6Kg、AU-15Kg、AU-30Kg、 AU-50Kg 产品品牌:Laumas称重传感器 意大利LAUMAS称重传感器 ...
产品名称:AS单点式称重传感器 产品型号:AS-0.25Kg、AS-0.5Kg、AS-1Kg 产品品牌:Laumas称重传感器 意大利LAUMAS称重传感器 产品类型:意大利...
产品名称:DTX双剪切梁称重传感器 产品型号:DTX-9000Kg、DTX-20klb、DTX-13600Kg、DTX-30klb、DTX-18000Kg、DTX-40klb、DTX-23000Kg、DTX-50klbKg、D...
产品名称:DTL-25000Kg双剪切梁称重传感器 产品型号:DTL-25000Kg 产品品牌:Laumas称重传感器 意大利LAUMAS称重传感器 产品类型:意大利LAUMAS...
GENERAL FEATURES VCOKDTL Galvanized steel mounting kit designed for weighing silos, tanks, mixing machines and hoppers subject to vibrati...
GENERAL FEATURES VDTX Mounting kit constructed of nickel-plated steel alloy; designed for on-board weighing, overhead cranes, silos, mixi...
GENERAL FEATURES V15000称重模块:for cells CBL 15000; CBX 30000 V30000称重模块:for cells CBL 30000; CBX 50000 V100000称重模块:for ce...
GENERAL FEATURES V10000 for cells CBL 250-12500; CBX 15000 V10275 for cells CBL 250-12500; CBX 15000 AISI-304 stainless steel mounting...
GENERAL FEATURES P10000:Lower plate BASESUP:Turned upper base BASEINF:Turned lower base PIASTRA+BASEINF:Turned lower base + Low...
PSCLS2000称重模块 PSCLS传感器 Hot worked galvanized mounting kit designed for silos, mixing machines, tanks, hoppers subject to vibration...
PV80CLS称重模块 Stainless steel mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a stainless steel self-ce...
GENERAL FEATURES PVCLS Stainless steel mounting kit designed for rollers, platforms, tanks, hoppers, etc..; provided with a self-centring...
PS for load cells FTP 3000-5000; FTK 3000-5000; FTZ 5000 PS10T for load cells FTP 10000 Hot worked galvanized mounting kit designed for s...
PPV / PPV80称重模块 FOR SINGLE POINT, BENDING BEAM, SHEAR BEAM AND COMPRESSION LOAD CELLS。
以质量求生存,以信誉求发展,满足合同规定及潜在需求!
全国咨询热线
157-6785-5089