TF FSB称重模块_意大利laumas

TF/FSB称重模块 (max 500 kg)

Mounting kit provided with AISI 304 stainless steel joint + rubber, to compensate for misalignment of the support plates. Stainless steel screws.

Max static load 500 kg.

CODE:TFFSB

FOR LOAD CELLS：FCAL - FCAX

DESCRIPTION：

Compression joint in AISI 304 stainless steel and rubber.

Lower plate and block in AISI 304 stainless steel.

Misalignment compensation of the support plates structure.

Adjustable height.

Locking screw to avoid damage during transport and installation.

DIMENSIONS AND TECHNICAL SPECIFICATIONS

During the transport and installation the lock (*) must touch under the load cell. After installation, move the lock away from the load cell.

Connect the structure to be weighed by means of copper wire, then connect all the lower plates to the earthing system.

In case of structure with four-point support, if one-point does not touch the compression joint, you must proceed to insert a shim before fixing he bolts otherwise adjust the height.

描述:

压缩接头采用AISI 304不锈钢和橡胶。

下板和块采用AISI 304不锈钢。

支撑板结构失配补偿。

可调节高度。

锁紧螺钉，避免运输和安装过程中损坏。

尺寸及技术规格

在运输和安装过程中，锁(*)必须接触测压元件下。安装后，将锁从测压元件移开。

用铜线将待称量的结构连接起来，再将所有较低的板连接到接地系统。

对于四点支承的结构，如果一点不接触压缩接头，在安装螺栓之前必须先插入垫片，否则调整高度。